bopsyo.blogg.se - Lb link router configuration

#Lb link router configuration manual
#Lb link router configuration password

The router will now reboot to apply your new settings and the setup is complete.

This includes your wireless network name and your wireless password.

A summary of your wireless settings is displayed.

#Lb link router configuration password

Note : This is not your wireless password.

This password is needed when you want to log into the router configuration setup page. This password is what you will need when connecting to your wireless signal for the first time. Enter a New Wireless Network Name and Password.

Password: Your Internet Password (Provided by your Internet Service Provider).

Username: Your Internet username (Provided by your Internet Service Provider).

Username / Password (PPPoE) – DSL Internet Service (Bell Sympatico, Teksavvy DSL, Sasktel, Acanac).

DHCP Connection (Dynamic IP Address) – Cable Internet Service (Rogers,Shaw,Cogeco, Videotron, Teksavvy).

If the scan was not successful, you will be prompted to select your Internet Type:.

If successful, the Internet Setup will be skipped.

The Router will perform a scan to determine the type of internet service you have.

The lights on the front of the router should all flash and reboot. – Return to step 5 To reset your device to default settings, press and hold the reset button (on the back of the router) for 10 seconds and release. If your router has been configured previously, you will need to reset it to go through the setup. Note: This wizard will only appear at the first configuration. Step 6: You should be prompted with the D-Link Quick Router Setup Wizard, Click Next to Begin. Step 5: Open your Internet browser (Internet Explorer/Firefox) and enter 192.168.0.1 into the address bar. Step 4: Power on both the router and your Internet Cable/DSL Modem Step 3: Connect your Cable/DSL modem to the Internet Port on your router

Step 2: Connect an Ethernet cable from your computer/laptop to a LAN port (Port 1,2,3 or 4) on your router Step 1: Unplug the Power to your Cable/DSL Internet Modem Is The Quick Setup Not Cutting It? Let’s Delve Deeper…

Step 5: Look in your network preferences and connect to the Wi-Fi Name (SSID) found on the provided Wireless Configuration Card and enter in the password also listed on the card. Step 4: Head to your computer or mobile device Step 3: Give it a moment to start up with a light indication

Step 2: Connect the Ethernet cable to the WAN (or internet) port of both your modem and router, connecting the two. Step 1: Connect the included power adapter to a wall socket and your router

#Lb link router configuration manual

Please contact your ISP or refer to the user manual for your modem/router device. Users with a Modem/Router Combo – If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so your D-Link router can work properly.In some cases, you may need to turn it off for up to 5 minutes. Users with Cable providers – Make sure you unplug the power to your modem.Do not proceed until you have this information. If you do not have this information, contact your Internet service provider (ISP). Users with DSL providers – If you are using a PPPoE connection, you will need your PPPoE username and password.But just in case you’d like some extra help, this blog explains the entire process and even provides links to helpful resources.Īlthough older devices may include a setup wizard CD instead of a Wi-Fi configuration card, your box should include: Thanks to D-Link’s Quick Router Setup process, it should be a piece of cake. So, you just purchased a D-Link router and now you’re ready to get your fast Wi-Fi up and running.